• Home
  • 3D Printing in Medicine and Surgery

3D Printing in Medicine and Surgery

3D Printing in Medicine and Surgery
  • Author : Daniel J. Thomas
  • Publsiher : Woodhead Publishing
  • Release : 14 August 2020
  • ISBN : 0081025432
  • Pages : 304 pages
  • Rating : 4/5 from 21 ratings
GET THIS BOOK3D Printing in Medicine and Surgery

Summary:
3D Printing in Medicine and Surgery: Applications in Healthcare is an advanced book on surgical and enhanced medical applications that can be achieved with 3D printing. It is an essential handbook for medical practitioners, giving access to a range of practical methods, while also focusing on applied knowledge. This comprehensive resource features practical experiments and processes for preparing 3D printable materials. Early chapters cover foundational knowledge and background reading, while later chapters discuss and review the current technologies used to engineer specific tissue types, experiments and methods, medical approaches and the challenges that lie ahead for future research. The book is an indispensable reference guide to the various methods used by current medical practitioners working at the forefront of 3D printing applications in medicine. Provides a detailed introduction and narrative on how 3-D printing can be used towards developing future medicine-based therapies Covers up-to-date methods across a range of application areas for the first time in book form Presents the only book on all current areas of 3D printing in medicine that is catered to a medical rather than engineering audience


3D Printing in Medicine and Surgery

3D Printing in Medicine and Surgery
  • Author : Daniel J. Thomas,Deepti Singh
  • Publisher : Woodhead Publishing
  • Release : 14 August 2020
GET THIS BOOK3D Printing in Medicine and Surgery

3D Printing in Medicine and Surgery: Applications in Healthcare is an advanced book on surgical and enhanced medical applications that can be achieved with 3D printing. It is an essential handbook for medical practitioners, giving access to a range of practical methods, while also focusing on applied knowledge. This comprehensive resource features practical experiments and processes for preparing 3D printable materials. Early chapters cover foundational knowledge and background reading, while later chapters discuss and review the current technologies used to


3D Printing: Application in Medical Surgery E-Book

3D Printing: Application in Medical Surgery E-Book
  • Author : Georgios Tsoulfas,Petros I. Bangeas,Jasjit S. Suri
  • Publisher : Elsevier Health Sciences
  • Release : 01 October 2019
GET THIS BOOK3D Printing: Application in Medical Surgery E-Book

Recent advances and technologies in 3D printing have improved and expanded applications for surgery, biomedical engineering, and nanotechnology. In this concise new title, Drs. Georgios Tsoulfas, Petros I. Bangeas, and Jasjit S. Suri synthesize state-of-the-art information on 3D printing and provide guidance on the optimal application in today’s surgical practice, from evaluation of the technology to virtual reality and future opportunities. Discusses challenges, opportunities, and limitations of 3D printing in the field of surgery. Covers patient and surgical education,


3D Printing in Medicine

3D Printing in Medicine
  • Author : Deepak M Kalaskar
  • Publisher : Woodhead Publishing
  • Release : 17 April 2017
GET THIS BOOK3D Printing in Medicine

3D Printing in Medicine examines the emerging market of 3D-printed biomaterials and its clinical applications. With a particular focus on both commercial and premarket tools, the book looks at their applications within medicine and the future outlook for the field. The book begins with a discussion of the fundamentals of 3D printing, including topics such as materials, and hardware. Chapters go on to cover applications within medicine such as computational analysis of 3D printed constructs, personalized 3D printing and 3D


3D Printing in Orthopaedic Surgery

3D Printing in Orthopaedic Surgery
  • Author : Matthew Dipaola
  • Publisher : Elsevier Health Sciences
  • Release : 20 November 2018
GET THIS BOOK3D Printing in Orthopaedic Surgery

Get a quick, expert overview of the role of emerging 3D printing technology in orthopaedic surgery, devices, and implants. This concise resource by Drs. Matthew DiPaola and Felasfa Wodajo provides orthopaedic surgeons and residents with need-to-know information on the clinical applications of 3D printing, including current technological capabilities, guidance for practice, and future outlooks for this fast-growing area. Covers basic principles such as engineering aspects, software, economics, legal considerations, and applications for education and surgery planning. Discusses 3D printing in


3D Printing: Applications in Medicine and Surgery

3D Printing: Applications in Medicine and Surgery
  • Author : Vasileios N. Papadopoulos,Vassilios Tsioukas,Jasjit S. Suri
  • Publisher : Elsevier
  • Release : 01 October 2019
GET THIS BOOK3D Printing: Applications in Medicine and Surgery

New technologies in 3D printing offer innovative capabilities in surgery, from planning complex operations to providing alternatives to traditional training with more cost-effective outcomes. In 3D Printing: Application in Medical Surgery, Volume 2, Drs. Vasileios N. Papadopoulos, Vassilios Tsioukas, and Jasjit S. Suri bring together up-to-date information on 3D printing and its application in surgical specialties such as hebatobilliary and pancreatic surgery, vascular surgery, orthopedic surgery, obstetrics and gynecology, cardiovascular and thoracic surgery, and more. Discusses challenges and opportunities of 3D


3D Bioprinting for Reconstructive Surgery

3D Bioprinting for Reconstructive Surgery
  • Author : Daniel Thomas,Zita M. Jessop,Iain S. Whitaker
  • Publisher : Woodhead Publishing
  • Release : 14 November 2017
GET THIS BOOK3D Bioprinting for Reconstructive Surgery

3D Bioprinting for Reconstructive Surgery: Techniques and Applications examines the combined use of materials, procedures and tools necessary for creating structural tissue constructs for reconstructive purposes. Offering a broad analysis of the field, the first set of chapters review the range of biomaterials which can be used to create 3D-printed tissue constructs. Part Two looks at the techniques needed to prepare biomaterials and biological materials for 3D printing, while the final set of chapters examines application-specific examples of tissues formed


3D Printing Applications in Cardiovascular Medicine

3D Printing Applications in Cardiovascular Medicine
  • Author : James K Min,Bobak Mosadegh,Simon Dunham,Subhi Jamal Al'Aref
  • Publisher : Academic Press
  • Release : 04 July 2018
GET THIS BOOK3D Printing Applications in Cardiovascular Medicine

3D Printing Applications in Cardiovascular Medicine addresses the rapidly growing field of additive fabrication within the medical field, in particular, focusing on cardiovascular medicine. To date, 3D printing of hearts and vascular systems has been largely reserved to anatomic reconstruction with no additional functionalities. However, 3D printing allows for functional, physiologic and bio-engineering of products to enhance diagnosis and treatment of cardiovascular disease. This book contains the state-of-the-art technologies and studies that demonstrate the utility of 3D printing for these


3D Printing in Medicine

3D Printing in Medicine
  • Author : Frank J. Rybicki,Gerald T. Grant
  • Publisher : Springer
  • Release : 27 September 2017
GET THIS BOOK3D Printing in Medicine

This book describes the fundamentals of three-dimensional (3D) printing, addresses the practical aspects of establishing a 3D printing service in a medical facility, and explains the enormous potential value of rendering images as 3D printed models capable of providing tactile feedback and tangible information on both anatomic and pathologic states. Individual chapters also focus on selected areas of applications for 3D printing, including musculoskeletal, craniomaxillofacial, cardiovascular, and neurosurgery applications. Challenges and opportunities related to training, materials and equipment, and guidelines


Arthroplasty

Arthroplasty
  • Author : Vaibhav Bagaria
  • Publisher : BoD – Books on Demand
  • Release : 27 January 2016
GET THIS BOOKArthroplasty

This book is aimed at giving an overview of the field of arthroplasty and covers arthroplasty of several regions starting from the cervical spine to the ankle. While the current trend is focusing on one particular joint, sometimes having an understanding of the entire subject and cross learning from various subspecialties play a key role in evolving the science. The book is precisely meant to do that, exposing the readers to various types of arthroplasties. It also touches on failures


3D Printing Technology in Nanomedicine

3D Printing Technology in Nanomedicine
  • Author : Nabeel Ahmad,P. Gopinath,Rajiv Dutta
  • Publisher : Elsevier
  • Release : 30 March 2019
GET THIS BOOK3D Printing Technology in Nanomedicine

3D Printing Technology in Nanomedicine provides an integrated and introductory look into the rapidly evolving field of nanobiotechnology. It demystifies the processes of commercialization and discusses legal and regulatory considerations. With a focus on nanoscale processes and biomedical applications, users will find this to be a comprehensive resource on how 3D printing can be utilized in a range of areas, including the diagnosis and treatment of a variety of human diseases. Examines the emerging market of 3D-printed biomaterials and their


A Textbook of Advanced Oral and Maxillofacial Surgery

A Textbook of Advanced Oral and Maxillofacial Surgery
  • Author : Mohammad Hosein Motamedi
  • Publisher : BoD – Books on Demand
  • Release : 31 August 2016
GET THIS BOOKA Textbook of Advanced Oral and Maxillofacial Surgery

Advanced oral and maxillofacial surgery encompasses a vast array of diseases, disorders, defects, and deformities as well as injuries of the mouth, head, face, and jaws. It relates not only to treatment of impacted teeth, facial pain, misaligned jaws, facial trauma, oral cancers, jaw cysts, and tumors but also to facial cosmetic surgery and placement of dental and facial implants. This specialty is evolving alongside advancements in technology and instrumentation. Volume 1 has topped 132,000 chapter downloads so far, and Volume 2 is


Medical Modelling

Medical Modelling
  • Author : Richard Bibb,Dominic Eggbeer,Abby Paterson
  • Publisher : Woodhead Publishing
  • Release : 13 December 2014
GET THIS BOOKMedical Modelling

Medical modelling and the principles of medical imaging, Computer Aided Design (CAD) and Rapid Prototyping (also known as Additive Manufacturing and 3D Printing) are important techniques relating to various disciplines - from biomaterials engineering to surgery. Building on the success of the first edition, Medical Modelling: The application of Advanced Design and Rapid Prototyping techniques in medicine provides readers with a revised edition of the original text, along with key information on innovative imaging techniques, Rapid Prototyping technologies and case


A Roadmap from Idea to Implementation

A Roadmap from Idea to Implementation
  • Author : Hui Chen,Michelle Gabriel
  • Publisher : Createspace Independent Publishing Platform
  • Release : 24 September 2016
GET THIS BOOKA Roadmap from Idea to Implementation

While 3D printing is a 30-year-old technology, its applications are believed to be still at infancy stage. Expiring patents, lower cost printers and materials, improved healthcare specific software allow for more players to get involve and identify new opportunities in healthcare vertical. Although still a small percentage of total manufacture market share, the tremendous potential of healthcare 3D printing is undeniable. There has been a significant recent increase in the medical community in using 3D printing technology for pre-surgical planning



3D Printing Will Rock the World

3D Printing Will Rock the World
  • Author : John Hornick
  • Publisher : Createspace Independent Publishing Platform
  • Release : 04 December 2015
GET THIS BOOK3D Printing Will Rock the World

The digital manufacturing revolution is upon us, and at its current center is the 3D printer. Arguably the most powerful machine ever invented, its possibilities are endless. In 3D Printing Will Rock the World, author John Hornick presents an insightful look at how 3D printing could potentially change the planet. 3DPrintingIndustry.com said "John Hornick's '3D Printing Will Rock the World' Rocks." 3DPrintingStocks.com called it a "must read." To see what industry experts say, see the back cover.