• Home
  • Additive and Traditionally Manufactured Components

Additive and Traditionally Manufactured Components

Additive and Traditionally Manufactured Components
  • Author : Joshua Pelleg
  • Publsiher : Elsevier
  • Release : 30 April 2020
  • ISBN : 012821919X
  • Pages : 656 pages
  • Rating : 4/5 from 21 ratings
GET THIS BOOKAdditive and Traditionally Manufactured Components

Summary:
Additive and Traditionally Manufactured Components: A Comparative Analysis of Mechanical Properties looks at the mechanical properties of materials produced by additive manufacturing (AM) and compares them with conventional methods. Since the production of objects by AM techniques can used in a broad array of materials, the alloys presented are the ones most commonly produced by AM - Al alloys, Ti alloys and steel. The book explores the six main types of techniques: Fused Deposition Method (FDM), Powder Bed Fusion (PBF), Inkjet Printing, Stereolithography (SLA), Direct Energy Deposition (DED) and Laminated Object Manufacturing (LOM), and follows with the techniques being utilized for fabrication. Testing of AM fabricated specimens, including tension, compression and hardness is included, along with a comparison of those results to specimens obtained by conventional fabrication methods. Topics covered include static deformation, time dependent deformation (creep), cyclic deformation (fatigue) and fracture in specimens. The book concludes with a review of the mechanical properties of nanoscale specimens obtained by AM. Thoroughly explores AM processes that can be utilized for experimental design Includes a review of dislocations observed in specimens obtained by AM Compares the impact of both additive and traditional manufacturing techniques on the mechanical properties of materials


Additive and Traditionally Manufactured Components

Additive and Traditionally Manufactured Components
  • Author : Joshua Pelleg
  • Publisher : Elsevier
  • Release : 30 April 2020
GET THIS BOOKAdditive and Traditionally Manufactured Components

Additive and Traditionally Manufactured Components: A Comparative Analysis of Mechanical Properties looks at the mechanical properties of materials produced by additive manufacturing (AM) and compares them with conventional methods. Since the production of objects by AM techniques can used in a broad array of materials, the alloys presented are the ones most commonly produced by AM - Al alloys, Ti alloys and steel. The book explores the six main types of techniques: Fused Deposition Method (FDM), Powder Bed Fusion (PBF),


Laser-Based Additive Manufacturing of Metal Parts

Laser-Based Additive Manufacturing of Metal Parts
  • Author : Linkan Bian,Nima Shamsaei,John Usher
  • Publisher : CRC Press
  • Release : 09 August 2017
GET THIS BOOKLaser-Based Additive Manufacturing of Metal Parts

Laser-Based Additive Manufacturing (LBAM) technologies, hailed by some as the "third industrial revolution," can increase product performance, while reducing time-to-market and manufacturing costs. This book is a comprehensive look at new technologies in LBAM of metal parts, covering topics such as mechanical properties, microstructural features, thermal behavior and solidification, process parameters, optimization and control, uncertainty quantification, and more. The book is aimed at addressing the needs of a diverse cross-section of engineers and professionals.


Structure and Properties of Additive Manufactured Polymer Components

Structure and Properties of Additive Manufactured Polymer Components
  • Author : Klaus Friedrich,Rolf Walter
  • Publisher : Woodhead Publishing
  • Release : 18 June 2020
GET THIS BOOKStructure and Properties of Additive Manufactured Polymer Components

Structure and Properties of Additive Manufactured Polymer Components provides a state-of-the-art review from leading experts in the field who discuss key developments that have appeared over the last decade or so regarding the use of additive manufacturing (AM) methods in the production of neat and reinforced polymeric components. A major focus is given to materials science aspects, i.e., how the quality of the polymer preforms, the parameters of the chosen AM method, and how these factors can affect the


Additive Manufacturing Change Management

Additive Manufacturing Change Management
  • Author : David M. Dietrich,Michael Kenworthy,Elizabeth A. Cudney
  • Publisher : CRC Press
  • Release : 04 February 2019
GET THIS BOOKAdditive Manufacturing Change Management

Additive Manufacturing (AM) has altered manufacturing as we know it, with shortened development time, increased performance, and reduced product costs. Executive management in industry are bombarded by marketing from their competitors showcasing design solutions leveraged through AM. Therefore, executive management ask their project management teams to figure out how to utilize AM within their own company. Clueless on how to approach the problem, managers start learning about AM from experts and become overwhelmed at the highly technical information. Unlike other


Resonant Ultrasound Spectroscopy for Quality Control of Geometrically Complex Additively Manufactured Components

Metal additive manufacturing (AM) has started to overshadow traditional manufacturing practices thanks to its ability to produce complex, high-performance and application-customized components. However, AM process parameters have not been optimized, leading to inconsistencies and imperfections such as cracks and pores in parts, as well as deviations from the original design. Nondestructive evaluation (NDE) methods used for part qualification such as x-ray computed tomography (CT) and conventional ultrasonic testing (UT) have limitations in their abilities. X-ray CT is costly, hazardous, and


Structural Integrity of Additive Manufactured Parts

Structural Integrity of Additive Manufactured Parts
  • Author : Nima Shamsaei
  • Publisher : Anonim
  • Release : 01 March 2021
GET THIS BOOKStructural Integrity of Additive Manufactured Parts

"This compilation of Selected Technical Papers, STP1620, Structural Integrity of Additive Manufactured Parts, contains peer-reviewed papers that were presented at a symposium held November 6-8, 2018, in Washington, DC, USA. The symposium was sponsored by ASTM International Committee F42 on Additive Manufacturing Technologies, with co-sponsorship from Committees E08 on Fatigue and Fracture and E07 on Nondestructive Testing"--


Thermo-Mechanical Modeling of Additive Manufacturing

Thermo-Mechanical Modeling of Additive Manufacturing
  • Author : Michael Gouge,Pan Michaleris
  • Publisher : Butterworth-Heinemann
  • Release : 03 August 2017
GET THIS BOOKThermo-Mechanical Modeling of Additive Manufacturing

Thermo-mechanical Modeling of Additive Manufacturing provides the background, methodology and description of modeling techniques to enable the reader to perform their own accurate and reliable simulations of any additive process. Part I provides an in depth introduction to the fundamentals of additive manufacturing modeling, a description of adaptive mesh strategies, a thorough description of thermal losses and a discussion of residual stress and distortion. Part II applies the engineering fundamentals to direct energy deposition processes including laser cladding, LENS builds,


Additive Manufacturing

Additive Manufacturing
  • Author : T.S. Srivatsan,T.S. Sudarshan
  • Publisher : CRC Press
  • Release : 25 September 2015
GET THIS BOOKAdditive Manufacturing

Get Ready for the Future of Additive Manufacturing Additive Manufacturing: Innovations, Advances, and Applications explores the emerging field of additive manufacturing (AM)—the use of 3D printing to make prototype parts on demand. Often referred to as the third industrial revolution, AM offers many advantages over traditional manufacturing. This process enables users to quickly build three-dimensional objects from the bottom-up, adding material one cross-sectional layer at a time directly from a computer model. This book provides a clear overview of


Rapid Manufacturing

Rapid Manufacturing
  • Author : Neil Hopkinson,Richard Hague,R. J. M. Hague,Philip Dickens
  • Publisher : John Wiley & Sons
  • Release : 01 March 2021
GET THIS BOOKRapid Manufacturing

Rapid Manufacturing is a new area of manufacturing developed from a family of technologies known as Rapid Prototyping. These processes have already had the effect of both improving products and reducing their development time; this in turn resulted in the development of the technology of Rapid Tooling, which implemented Rapid Prototyping techniques to improve its own processes. Rapid Manufacturing has developed as the next stage, in which the need for tooling is eliminated. It has been shown that it is


Additive Manufacturing of Metals: The Technology, Materials, Design and Production

Additive Manufacturing of Metals: The Technology, Materials, Design and Production
  • Author : Li Yang,Keng Hsu,Brian Baughman,Donald Godfrey,Francisco Medina,Mamballykalathil Menon,Soeren Wiener
  • Publisher : Springer
  • Release : 11 May 2017
GET THIS BOOKAdditive Manufacturing of Metals: The Technology, Materials, Design and Production

This book offers a unique guide to the three-dimensional (3D) printing of metals. It covers various aspects of additive, subtractive, and joining processes used to form three-dimensional parts with applications ranging from prototyping to production. Examining a variety of manufacturing technologies and their ability to produce both prototypes and functional production-quality parts, the individual chapters address metal components and discuss some of the important research challenges associated with the use of these technologies. As well as exploring the latest technologies


Additive Manufacturing Handbook

Additive Manufacturing Handbook
  • Author : Adedeji B. Badiru,Vhance V. Valencia,David Liu
  • Publisher : CRC Press
  • Release : 19 May 2017
GET THIS BOOKAdditive Manufacturing Handbook

Theoretical and practical interests in additive manufacturing (3D printing) are growing rapidly. Engineers and engineering companies now use 3D printing to make prototypes of products before going for full production. In an educational setting faculty, researchers, and students leverage 3D printing to enhance project-related products. Additive Manufacturing Handbook focuses on product design for the defense industry, which affects virtually every other industry. Thus, the handbook provides a wide range of benefits to all segments of business, industry, and government. Manufacturing


Additive Manufacturing for the Aerospace Industry

Additive Manufacturing for the Aerospace Industry
  • Author : Francis H. Froes,Rodney Boyer
  • Publisher : Elsevier
  • Release : 15 February 2019
GET THIS BOOKAdditive Manufacturing for the Aerospace Industry

Additive Manufacturing for the Aerospace Industry explores the design, processing, metallurgy and applications of additive manufacturing (AM) within the aerospace industry. The book's editors have assembled an international team of experts who discuss recent developments and the future prospects of additive manufacturing. The work includes a review of the advantages of AM over conventionally subtractive fabrication, including cost considerations. Microstructures and mechanical properties are also presented, along with examples of components fabricated by AM. Readers will find information on a


Evaluation of Ship Board Additive Manufacturing

Evaluation of Ship Board Additive Manufacturing
  • Author : Anonim
  • Publisher : Anonim
  • Release : 01 March 2021
GET THIS BOOKEvaluation of Ship Board Additive Manufacturing

Additive manufacturing (AM) is a rapidly emerging technology that has the potential to revolutionize modern manufacturing. Within the Navy, AM is being investigated for use in land based environments in rapid fabrication, legacy part development and repair, fabrication of custom tooling, rapid prototyping, and novel designs with complex internal geometries. There are a wide range of materials from polymers to metals that can be used in AM. The ability of additive layer manufacturing to rapidly fabricate complex components enables unparalleled



Light Metal Alloys Applications

Light Metal Alloys Applications
  • Author : Waldemar Alfredo Monteiro
  • Publisher : BoD – Books on Demand
  • Release : 11 June 2014
GET THIS BOOKLight Metal Alloys Applications

Lightweight alloys have become of great importance in engineering for construction of transportation equipment. At present, the metals that serve as the base of the principal light alloys are aluminum and magnesium. One of the most important lightweight alloys are the aluminum alloys in use for several applications (structural components wrought aluminum alloys, parts and plates). However, some casting parts that have low cost of production play important role in aircraft parts. Magnesium and its alloys are among the lightest