• Home
  • Solder Joint Reliability Assessment

Solder Joint Reliability Assessment

Solder Joint Reliability Assessment
  • Author : Mohd N. Tamin
  • Publsiher : Springer Science & Business
  • Release : 26 April 2014
  • ISBN : 3319000926
  • Pages : 174 pages
  • Rating : 4/5 from 21 ratings
GET THIS BOOKSolder Joint Reliability Assessment

Summary:
This book presents a systematic approach in performing reliability assessment of solder joints using Finite Element (FE) simulation. Essential requirements for FE modelling of an electronic package or a single reflowed solder joint subjected to reliability test conditions are elaborated. These cover assumptions considered for a simplified physical model, FE model geometry development, constitutive models for solder joints and aspects of FE model validation. Fundamentals of the mechanics of solder material are adequately reviewed in relation to FE formulations. Concept of damage is introduced along with deliberation of cohesive zone model and continuum damage model for simulation of solder/IMC interface and bulk solder joint failure, respectively. Applications of the deliberated methodology to selected problems in assessing reliability of solder joints are demonstrated. These industry-defined research-based problems include solder reflow cooling, temperature cycling and mechanical fatigue of a BGA package, JEDEC board-level drop test and mechanisms of solder joint fatigue. Emphasis is placed on accurate quantitative assessment of solder joint reliability through basic understanding of the mechanics of materials as interpreted from results of FE simulations. The FE simulation methodology is readily applicable to numerous other problems in mechanics of materials and structures.


Solder Joint Reliability Assessment

Solder Joint Reliability Assessment
  • Author : Mohd N. Tamin,Norhashimah M. Shaffiar
  • Publisher : Springer Science & Business
  • Release : 26 April 2014
GET THIS BOOKSolder Joint Reliability Assessment

This book presents a systematic approach in performing reliability assessment of solder joints using Finite Element (FE) simulation. Essential requirements for FE modelling of an electronic package or a single reflowed solder joint subjected to reliability test conditions are elaborated. These cover assumptions considered for a simplified physical model, FE model geometry development, constitutive models for solder joints and aspects of FE model validation. Fundamentals of the mechanics of solder material are adequately reviewed in relation to FE formulations. Concept

Book Solder Joint Reliability Assessment PDF Download/ Read Online


Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials

Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials
  • Author : P.D. Portella,K.-T. Rie
  • Publisher : Elsevier
  • Release : 30 September 1998
GET THIS BOOKLow Cycle Fatigue and Elasto-Plastic Behaviour of Materials

The 4th International Conference on Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials was held from 7-11 September 1998 in Garmisch-Partenkirchen, Germany. In response to a call for papers, nearly 200 extended abstracts from 32 countries were submitted to the organizing committee. These papers were presented at the conference as invited lectures or short contributions and as oral or poster presentation. All the papers were presented in poster form in extended poster sessions–a peculiarity of the LCF Conferences which allows an intense,

Book Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials PDF Download/ Read Online


Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials—3

Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials—3
  • Author : K.T. Rie,H.W. Grünling,G. König,P. Neumann,H. Nowack,K.-H. Schwalbe,T. Seeger
  • Publisher : Springer Science & Business Media
  • Release : 06 December 2012
GET THIS BOOKLow Cycle Fatigue and Elasto-Plastic Behaviour of Materials—3

Proceeds of the Third International Conference on Low Cycle Fatigue and Elasto-plastic Behaviour of Materials, Berlin Congress Center, Berlin, Germany, 7-11 September 1992

Book Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials—3 PDF Download/ Read Online


Monotonic and Ultra-Low-Cycle Fatigue Behaviour of Pipeline Steels

Monotonic and Ultra-Low-Cycle Fatigue Behaviour of Pipeline Steels
  • Author : António Augusto Fernandes,Abílio M.P. de Jesus,Renato Natal Jorge
  • Publisher : Springer
  • Release : 15 June 2018
GET THIS BOOKMonotonic and Ultra-Low-Cycle Fatigue Behaviour of Pipeline Steels

This book covers the development of innovative computational methodologies for the simulation of steel material fracture under both monotonic and ultra-low-cycle fatigue. The main aspects are summarised as follows: i) Database of small and full-scale testing data covering the X52, X60, X65, X70 and X80 piping steel grades. Monotonic and ULCF tests of pipe components were performed (buckled and dented pipes, elbows and straight pipes). ii) New constitutive models for both monotonic and ULCF loading are proposed. Besides the Barcelona

Book Monotonic and Ultra-Low-Cycle Fatigue Behaviour of Pipeline Steels PDF Download/ Read Online


Cyclic plasticity modeling and multiaxial fatigue assessment for an austenitic steel

Cyclic plasticity modeling and multiaxial fatigue assessment for an austenitic steel
  • Author : Jie Fang
  • Publisher : Herbert Utz Verlag
  • Release : 23 July 2015
GET THIS BOOKCyclic plasticity modeling and multiaxial fatigue assessment for an austenitic steel

The present work aims at engineers and scientists in the field of computational mechanics of materials. The objective of this work is to develop a suitable constitutive law and apply it to study effects of cyclic loading and geometry on the fatigue assessment. Firstly, a systematical investigation on the mechanic behaviors of an austenitic stainless steel is carried out. Different multiaxial fatigue life prediction models are studied to assess fatigue damage. The Karim-Ohno kinematic hardening model is extended to incorporate

Book Cyclic plasticity modeling and multiaxial fatigue assessment for an austenitic steel PDF Download/ Read Online


Modeling High Temperature Materials Behavior for Structural Analysis

Modeling High Temperature Materials Behavior for Structural Analysis
  • Author : Konstantin Naumenko,Holm Altenbach
  • Publisher : Springer
  • Release : 11 May 2016
GET THIS BOOKModeling High Temperature Materials Behavior for Structural Analysis

This monograph presents approaches to characterize inelastic behavior of materials and structures at high temperature. Starting from experimental observations, it discusses basic features of inelastic phenomena including creep, plasticity, relaxation, low cycle and thermal fatigue. The authors formulate constitutive equations to describe the inelastic response for the given states of stress and microstructure. They introduce evolution equations to capture hardening, recovery, softening, ageing and damage processes. Principles of continuum mechanics and thermodynamics are presented to provide a framework for the

Book Modeling High Temperature Materials Behavior for Structural Analysis PDF Download/ Read Online


Analysis of Engineering Structures and Material Behavior

Analysis of Engineering Structures and Material Behavior
  • Author : Josip Brnic
  • Publisher : John Wiley & Sons
  • Release : 18 January 2018
GET THIS BOOKAnalysis of Engineering Structures and Material Behavior

Theoretical and experimental study of the mechanical behavior of structures under load Analysis of Engineering Structures and Material Behavior is a textbook covering introductory and advanced topics in structural analysis. It begins with an introduction to the topic, before covering fundamental concepts of stress, strain and information about mechanical testing of materials. Material behaviors, yield criteria and loads imposed on the engineering elements are also discussed. The book then moves on to cover more advanced areas including relationships between stress

Book Analysis of Engineering Structures and Material Behavior PDF Download/ Read Online


Fatigue and Fracture of Non-metallic Materials and Structures

Fatigue and Fracture of Non-metallic Materials and Structures
  • Author : Andrea Spagnoli
  • Publisher : MDPI
  • Release : 23 June 2020
GET THIS BOOKFatigue and Fracture of Non-metallic Materials and Structures

The mechanics of fracture and fatigue have produced a huge body of research work in relation to applications to metal materials and structures. However, a variety of non-metallic materials (e.g., concrete and cementitious composites, rocks, glass, ceramics, bituminous mixtures, composites, polymers, rubber and soft matter, bones and biological materials, and advanced and multifunctional materials) have received relatively less attention, despite their attractiveness for a large spectrum of applications related to the components and structures of diverse engineering branches, applied

Book Fatigue and Fracture of Non-metallic Materials and Structures PDF Download/ Read Online


Constitutive Models for Rubber VIII

Constitutive Models for Rubber VIII
  • Author : Nere Gil-Negrete,Asier Alonso
  • Publisher : CRC Press
  • Release : 03 June 2013
GET THIS BOOKConstitutive Models for Rubber VIII

Due to their unique properties, rubber materials are found in multiple engineering applications such as tires, engine mounts, shock absorbers, flexible joints, seals, etc. Nevertheless, the complex nature of the behavior of such material makes it difficult to accurately model and predict the performance of these units.The challenge to correctly rep

Book Constitutive Models for Rubber VIII PDF Download/ Read Online


Continuous and Discontinuous Modelling of Fracture in Concrete Using FEM

Continuous and Discontinuous Modelling of Fracture in Concrete Using FEM
  • Author : Jacek Tejchman,Jerzy Bobiński
  • Publisher : Springer Science & Business Media
  • Release : 28 July 2012
GET THIS BOOKContinuous and Discontinuous Modelling of Fracture in Concrete Using FEM

The book analyzes a quasi-static fracture process in concrete and reinforced concrete by means of constitutive models formulated within continuum mechanics. A continuous and discontinuous modelling approach was used. Using a continuous approach, numerical analyses were performed using a finite element method and four different enhanced continuum models: isotropic elasto-plastic, isotropic damage and anisotropic smeared crack one. The models were equipped with a characteristic length of micro-structure by means of a non-local and a second-gradient theory. So they could properly

Book Continuous and Discontinuous Modelling of Fracture in Concrete Using FEM PDF Download/ Read Online


Handbook of Materials Behavior Models, Three-Volume Set

Handbook of Materials Behavior Models, Three-Volume Set
  • Author : Jean LeMaitre
  • Publisher : Elsevier
  • Release : 17 November 2001
GET THIS BOOKHandbook of Materials Behavior Models, Three-Volume Set

This first of a kind reference/handbook deals with nonlinear models and properties of material. In the study the behavior of materials' phenomena no unique laws exist. Therefore, researchers often turn to models to determine the properties of materials. This will be the first book to bring together such a comprehensive collection of these models. The Handbook deals with all solid materials, and is organized first by phenomena. Most of the materials models presented in an applications-oriented fashion, less descriptive

Book Handbook of Materials Behavior Models, Three-Volume Set PDF Download/ Read Online




Inelastic Behaviour of Structures under Variable Loads

Inelastic Behaviour of Structures under Variable Loads
  • Author : Zenon Mróz,Dieter Weichert,Stanislaw Dorosz
  • Publisher : Springer Science & Business Media
  • Release : 06 December 2012
GET THIS BOOKInelastic Behaviour of Structures under Variable Loads

This collection of papers is a state of the art presentation of theories and methods related to the problem of the behaviour of mechanical structures under variable loads beyond their elastic limit In particular, the problems of shakedown, ratchetting, transient and asymptotic cyclic states are addressed. The volume is composed of four chapters devoted to material modelling for cyclic loading conditions; general theory of accommodated states of structures; effects of changes of the geometry on the inelastic structural response; and

Book Inelastic Behaviour of Structures under Variable Loads PDF Download/ Read Online


Advanced Methods of Fatigue Assessment

Advanced Methods of Fatigue Assessment
  • Author : Dieter Radaj,Michael Vormwald
  • Publisher : Springer Science & Business Media
  • Release : 13 May 2013
GET THIS BOOKAdvanced Methods of Fatigue Assessment

In five chapters, this volume presents recent developments in fatigue assessment. In the first chapter, a generalized Neuber concept of fictitious notch rounding is presented where the microstructural support factors depend on the notch opening angle besides the loading mode. The second chapter specifies the notch stress factor including the strain energy density and J-integral concept while the SED approach is applied to common fillet welded joints and to thin-sheet lap welded joints in the third chapter. The forth chapter

Book Advanced Methods of Fatigue Assessment PDF Download/ Read Online