• Home
  • Plastic Analysis and Design of Steel Structures

Plastic Analysis and Design of Steel Structures

Plastic Analysis and Design of Steel Structures
  • Author : M. Bill Wong
  • Publsiher : Butterworth-Heinemann
  • Release : 30 August 2011
  • ISBN : 0080941850
  • Pages : 256 pages
  • Rating : 4/5 from 21 ratings
GET THIS BOOKPlastic Analysis and Design of Steel Structures

Summary:
The plastic analysis method has been used extensively by engineers for designing steel structures. Simpler structures can be analyzed using the basic virtual work formulation, but more complex frames are evaluated with specialist computer software. This new book sets out a method for carrying out plastic analysis of complex structures without the need for specialist tools. The book provides an introduction to the use of linear programming techniques for plastic analysis. This powerful and advanced method for plastic analysis is important in an automated computational environment, in particular for non-linear structural analysis. A detailed comparison between the design codes for the United States and Australia and the emerging European Eurocodes enables practising engineers to understand the issues involved in plastic design procedures and the limitations imposed by this design method. * Covers latest research in plastic analysis and analytical tools * Introduces new successive approximation method for calculating collapse loads * Programming guide for using spreadsheet tools for plastic analysis


Plastic Analysis and Design of Steel Structures

Plastic Analysis and Design of Steel Structures
  • Author : M. Bill Wong
  • Publisher : Butterworth-Heinemann
  • Release : 30 August 2011
GET THIS BOOKPlastic Analysis and Design of Steel Structures

The plastic analysis method has been used extensively by engineers for designing steel structures. Simpler structures can be analyzed using the basic virtual work formulation, but more complex frames are evaluated with specialist computer software. This new book sets out a method for carrying out plastic analysis of complex structures without the need for specialist tools. The book provides an introduction to the use of linear programming techniques for plastic analysis. This powerful and advanced method for plastic analysis is


Design of Steel Structures

Design of Steel Structures
  • Author : Elias G. Abu-Saba
  • Publisher : Springer Science & Business Media
  • Release : 06 December 2012
GET THIS BOOKDesign of Steel Structures

This book is intended for classroom teaching in architectural and civil engineering at the graduate and undergraduate levels. Although it has been developed from lecture notes given in structural steel design, it can be useful to practicing engineers. Many of the examples presented in this book are drawn from the field of design of structures. Design of Steel Structures can be used for one or two semesters of three hours each on the undergraduate level. For a two-semester curriculum, Chapters 1



Ductile Design of Steel Structures, 2nd Edition

Ductile Design of Steel Structures, 2nd Edition
  • Author : Michel Bruneau,Chia-Ming Uang,Rafael Sabelli
  • Publisher : McGraw Hill Professional
  • Release : 01 August 2011
GET THIS BOOKDuctile Design of Steel Structures, 2nd Edition

Comprehensive coverage of the background and design requirements for plastic and seismic design of steel structures Thoroughly revised throughout, Ductile Design of Steel Structures, Second Edition, reflects the latest plastic and seismic design provisions and standards from the American Institute of Steel Construction (AISC) and the Canadian Standard Association (CSA). The book covers steel material, cross-section, component, and system response for applications in plastic and seismic design, and provides practical guidance on how to incorporate these principles into structural design.


Design of Steel Structures

Design of Steel Structures
  • Author : Luís Simões da Silva,Rui Simões,Helena Gervasio
  • Publisher : John Wiley & Sons
  • Release : 09 January 2012
GET THIS BOOKDesign of Steel Structures

This book introduces the fundamental design concept of Eurocode 3 for current steel structures in building construction, and their practical application. Following a discussion of the basis of design, including the principles of reliability management and the limit state approach, the material standards and their use are detailed. The fundamentals of structural analysis and modeling are presented, followed by the design criteria and approaches for various types of structural members. The theoretical basis and checking procedures are closely tied to the


Analysis and Design of Steel and Composite Structures

Analysis and Design of Steel and Composite Structures
  • Author : Qing Quan Liang
  • Publisher : CRC Press
  • Release : 08 October 2018
GET THIS BOOKAnalysis and Design of Steel and Composite Structures

Steel and composite steel–concrete structures are widely used in modern bridges, buildings, sport stadia, towers, and offshore structures. Analysis and Design of Steel and Composite Structures offers a comprehensive introduction to the analysis and design of both steel and composite structures. It describes the fundamental behavior of steel and composite members and structures, as well as the current design criteria and procedures given in Australian standards AS/NZS 1170, AS 4100, AS 2327.1, Eurocode 4, and AISC-LRFD specifications. Featuring numerous step-by-step examples that


Plastic Design and Second-Order Analysis of Steel Frames

Plastic Design and Second-Order Analysis of Steel Frames
  • Author : W.F. Chen,I. Sohal
  • Publisher : Springer
  • Release : 20 December 2013
GET THIS BOOKPlastic Design and Second-Order Analysis of Steel Frames

Plastic Design of Steel Frames assesses the current status and future direction of computer-based analyses of inelastic strength and stability for direct frame design. It shows how design rules are used in practical frame design and provides an introduction to the second-order theory of inelastic frame design. The book includes two computer programs on a diskette: one for the first-order analyses and the other for the second-order plastic hinge analysis of planar frame design. The second-order program can be used







Design of Steel Structures (Vol. 2)

Design of Steel Structures (Vol. 2)
  • Author : Ramchandra,V. Gehlot
  • Publisher : Scientific Publishers
  • Release : 01 February 2015
GET THIS BOOKDesign of Steel Structures (Vol. 2)

Eight edition of this book is based on Bridge Rules (Adopted in 1941, Revised in 1964 and Reprinted in 1989), and IS: 800-2007. Authors have distributed present text in the edition in thirty two chapters [that is, in Four parts (1) Steel Bridges and Influence Lines Diagrams for axial forces for the members of different types of truss-girders, (2) Special Steel Structures (3) Analysis of Structures specially, the method of tension co-efficients for determinate and indeterminate structures, (4) Aluminium structures. In order to emphasize that similar to


Design and Analysis of Connections in Steel Structures

Design and Analysis of Connections in Steel Structures
  • Author : Alfredo Boracchini
  • Publisher : John Wiley & Sons
  • Release : 10 July 2018
GET THIS BOOKDesign and Analysis of Connections in Steel Structures

The book introduces all the aspects needed for the safe and economic design and analysis of connections using bolted joints in steel structures. This is not treated according to any specific standard but making comparison among the different norms and methodologies used in the engineering practice, e.g. Eurocode, AISC, DIN, BS. Several examples are solved and illustrated in detail, giving the reader all the tools necessary to tackle also complex connection design problems. The book is introductory but also


Advanced Analysis and Design of Steel Frames

Advanced Analysis and Design of Steel Frames
  • Author : Gou-Qiang Li,Jin-Jin Li
  • Publisher : John Wiley & Sons
  • Release : 13 June 2007
GET THIS BOOKAdvanced Analysis and Design of Steel Frames

Steel frames are used in many commercial high-rise buildings, as well as industrial structures, such as ore mines and oilrigs. Enabling construction of ever lighter and safer structures, steel frames have become an important topic for engineers. This book, split into two parts covering advanced analysis and advanced design of steel frames, guides the reader from a broad array of frame elements through to advanced design methods such as deterministic, reliability, and system reliability design approaches. This book connects reliability