• Home
  • Plasticity of Metallic Materials

Plasticity of Metallic Materials

Plasticity of Metallic Materials
  • Author : Oana Cazacu
  • Publsiher : Elsevier
  • Release : 23 November 2020
  • ISBN : 0128179856
  • Pages : 560 pages
  • Rating : 4/5 from 21 ratings
GET THIS BOOKPlasticity of Metallic Materials

Summary:
Plasticity of Metallic Materials presents a rigorous framework for description of plasticity phenomena, classic and recent models for isotropic and anisotropic materials, new original analytical solutions to various elastic/plastic boundary value problems and new interpretations of mechanical data based on these recent models. The book covers models for metals with both cubic and hexagonal crystal structures, presents the mechanical tests required to determine the model parameters, various identification procedures, verification, and validation tests, and numerous applications to metal forming. Outlines latest research on plastic anisotropy and its role in metal forming Presents characterization and validation tests for metals with various crystal structures Compares the predictive capabilities of various models for a variety of loadings


Plasticity of Metallic Materials

Plasticity of Metallic Materials
  • Author : Oana Cazacu,Benoit Revil-Baudard
  • Publisher : Elsevier
  • Release : 23 November 2020
GET THIS BOOKPlasticity of Metallic Materials

Plasticity of Metallic Materials presents a rigorous framework for description of plasticity phenomena, classic and recent models for isotropic and anisotropic materials, new original analytical solutions to various elastic/plastic boundary value problems and new interpretations of mechanical data based on these recent models. The book covers models for metals with both cubic and hexagonal crystal structures, presents the mechanical tests required to determine the model parameters, various identification procedures, verification, and validation tests, and numerous applications to metal forming.


Fundamentals of Creep in Metals and Alloys

Fundamentals of Creep in Metals and Alloys
  • Author : Michael E. Kassner,Maria-Teresa Perez-Prado
  • Publisher : Elsevier
  • Release : 06 April 2004
GET THIS BOOKFundamentals of Creep in Metals and Alloys

* Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials * Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures * Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion Understanding the strength of materials at a range of temperatures is critically important to a huge number of researchers and practitioners from a wide range of


Plasticity of Metallic Materials

Plasticity of Metallic Materials
  • Author : Oana Cazacu,Benoit Revil-Baudard
  • Publisher : Elsevier
  • Release : 23 November 2020
GET THIS BOOKPlasticity of Metallic Materials

Plasticity of Metallic Materials presents a rigorous framework for description of plasticity phenomena, classic and recent models for isotropic and anisotropic materials, new original analytical solutions to various elastic/plastic boundary value problems and new interpretations of mechanical data based on these recent models. The book covers models for metals with both cubic and hexagonal crystal structures, presents the mechanical tests required to determine the model parameters, various identification procedures, verification, and validation tests, and numerous applications to metal forming.


Cyclic Plasticity of Engineering Materials

Cyclic Plasticity of Engineering Materials
  • Author : Guozheng Kang,Qianhua Kan
  • Publisher : John Wiley & Sons
  • Release : 01 May 2017
GET THIS BOOKCyclic Plasticity of Engineering Materials

New contributions to the cyclic plasticity of engineering materials Written by leading experts in the field, this book provides an authoritative and comprehensive introduction to cyclic plasticity of metals, polymers, composites and shape memory alloys. Each chapter is devoted to fundamentals of cyclic plasticity or to one of the major classes of materials, thereby providing a wide coverage of the field. The book deals with experimental observations on metals, composites, polymers and shape memory alloys, and the corresponding cyclic plasticity


Theory of Metal Forming Plasticity

Theory of Metal Forming Plasticity
  • Author : Andrzej Sluzalec
  • Publisher : Springer Science & Business Media
  • Release : 17 April 2013
GET THIS BOOKTheory of Metal Forming Plasticity

The intention of this book is to reveal and discuss some aspects of the metal fo- ing plasticity theory. The modern theory describes deformation of metallic bodies in cold and hot regimes under combined thermal and mechanical loadings. Th- mal and deformation fields appear in metal forming in various forms. A thermal field influences the material properties, modifies the extent of plastic zones, etc. and the deformation of metallic body induces changes in temperature distribution. The thermal effects in metal


Mechanical Properties of Complex Intermetallics

Mechanical Properties of Complex Intermetallics
  • Author : Esther Belin-Ferr‚
  • Publisher : World Scientific
  • Release : 03 March 2021
GET THIS BOOKMechanical Properties of Complex Intermetallics

This book will be the last one in a series of 4 books issued yearly as a deliverable of the research school established within the European Network of Excellence CMA (for Complex Metallic Alloys). It is written by reputed experts in the fields of metal physics, surface physics and chemistry, metallurgy and process engineering, combining expertise found inside as well as outside the network. The CMA network focuses on the huge group of largely unknown multinary alloys and compounds formed with



Formability of Metallic Materials

Formability of Metallic Materials
  • Author : D. Banabic,H.J. Bunge,K. Pöhlandt,A.E. Tekkaya
  • Publisher : Springer Science & Business Media
  • Release : 17 April 2013
GET THIS BOOKFormability of Metallic Materials

After a brief introduction into crystal plasticity,the fun- damentals of crystallographic textures and plastic anisotro- py, a main topic of this book, are outlined. A large chapter is devoted to formability testing both for bulk metal and sheet metal forming. For the first time testing methods for plastic anisotropy of round bars and tubes are included. A profound survey is given of literature about yield criteria for anisotropic materials up to most recent developments and the calculation of forming



Fundamentals of Creep in Metals and Alloys

Fundamentals of Creep in Metals and Alloys
  • Author : Michael E. Kassner
  • Publisher : Elsevier
  • Release : 27 November 2008
GET THIS BOOKFundamentals of Creep in Metals and Alloys

Creep refers to the slow, permanent deformation of materials under external loads, or stresses. It explains the creep strength or resistance to this extension. This book is for experts in the field of strength of metals, alloys and ceramics. It explains creep behavior at the atomic or “dislocation defect level. This book has many illustrations and many references. The figure formats are uniform and consistently labeled for increased readability. This book is the second edition that updates and improves the


Plasticity and Creep of Metals

Plasticity and Creep of Metals
  • Author : Andrew Rusinko,Konstantin Rusinko
  • Publisher : Springer Science & Business Media
  • Release : 24 July 2011
GET THIS BOOKPlasticity and Creep of Metals

This book serves both as a textbook and a scientific work. As a textbook, the work gives a clear, thorough and systematic presentation of the fundamental postulates, theorems and principles and their applications of the classical mathematical theories of plasticity and creep. In addition to the mathematical theories, the physical theory of plasticity, the book presents the Budiansky concept of slip and its modification by M. Leonov. Special attention is given to the analysis of the advantages and shortcomings of


Engineering Plasticity

Engineering Plasticity
  • Author : Z. R. Wang
  • Publisher : Wiley-Blackwell
  • Release : 03 March 2021
GET THIS BOOKEngineering Plasticity

An all-in-one guide to the theory and applications of plasticity in metal forming, featuring examples from the automobile and aerospace industries Provides a solid grounding in plasticity fundamentals and material properties Features models, theorems and analysis of processes and relationships related to plasticity, supported by extensive experimental data Offers a detailed discussion of recent advances and applications in metal forming


Thermo-Mechanical Processing of Metallic Materials

Thermo-Mechanical Processing of Metallic Materials
  • Author : Bert Verlinden,Julian Driver,Indradev Samajdar,Roger D. Doherty
  • Publisher : Elsevier
  • Release : 07 June 2007
GET THIS BOOKThermo-Mechanical Processing of Metallic Materials

Thermo-Mechanical Processing of Metallic Materials describes the science and technology behind modern thermo-mechanical processing (TMP), including detailed descriptions of successful examples of its application in the industry. This graduate-level introductory resource aims to fill the gap between two scientific approaches and illustrate their successful linkage by the use of suitable modern case studies. The book is divided into three key sections focusing on the basics of metallic materials processing. The first section covers the microstructural science base of the subject,


Plasticity

Plasticity
  • Author : P.M. Dixit,U.S. Dixit
  • Publisher : CRC Press
  • Release : 23 October 2014
GET THIS BOOKPlasticity

Explores the Principles of Plasticity Most undergraduate programs lack an undergraduate plasticity theory course, and many graduate programs in design and manufacturing lack a course on plasticity—leaving a number of engineering students without adequate information on the subject. Emphasizing stresses generated in the material and its effect, Plasticity: Fundamentals and Applications effectively addresses this need. This book fills a void by introducing the basic fundamentals of solid mechanics of deformable bodies. It provides a thorough understanding of plasticity theory,


Metal Plasticity and Fatigue at High Temperature

Metal Plasticity and Fatigue at High Temperature
  • Author : Denis Benasciutti,Luciano Moro,Jelena Srnec Novak
  • Publisher : MDPI
  • Release : 20 May 2020
GET THIS BOOKMetal Plasticity and Fatigue at High Temperature

In several industrial fields (such as automotive, steelmaking, aerospace, and fire protection systems) metals need to withstand a combination of cyclic loadings and high temperatures. In this condition, they usually exhibit an amount—more or less pronounced—of plastic deformation, often accompanied by creep or stress-relaxation phenomena. Plastic deformation under the action of cyclic loadings may cause fatigue cracks to appear, eventually leading to failures after a few cycles. In estimating the material strength under such loading conditions, the high-temperature